KSA Industrial Automation Company provides industrial automation in Al Khobar for consultants, EPC contractors, light-industry plants and facility operators who need a controls team that answers quickly. Our office is in Al Shati District, Dammam, in the next city along the coast. A fault call gets remote help the same day, and a quotation follows within one working day.
What you receive: a written proposal with scope, platforms, duration and price, back to you in one working day from the moment we hold your I/O list, drawings or fault description. Request a quotation
Industrial automation in Al Khobar: choose by your situation
Al Khobar enquiries tend to start with a problem rather than a project. This table matches the usual starting points to what we do.
| If you have | What we do | Platforms | Typical duration |
|---|---|---|---|
| A stopped machine or alarm you cannot clear | Remote diagnosis, then repair on site if needed | Siemens, Rockwell, Schneider, ABB | Same day remote start |
| A controller the vendor no longer supports | Retrofit with a phased change | Siemens S7-1500, Modicon M580 | 3–8 weeks |
| A consultant's specification to answer | I/O list review and a priced scope | IEC 61131-3 | Quotation in one working day |
| Pumps or tanks you cannot see from the office | Telemetry and dashboards | Modbus, DNP3, OPC UA, MQTT; 4G or fibre | 3–8 weeks |
Who in Al Khobar needs an outside automation team?
Mostly teams without an in-house controls engineer. That means engineering consultants and EPC contractors in the city's office districts, food and packaging plants, laboratories and workshops in the Thuqbah and Dhahran areas, and service companies working near Dhahran Techno Valley.
Al Khobar sits on the King Fahd Causeway route and close to the Aramco community in Dhahran, so many customers need documents that satisfy a larger owner. We are approved by Saudi Aramco and hold ISO 9001, ISO 14001 and ISO 45001. Our Schneider controller work is a common starting point for the smaller plants.
What happens after a fault call from Al Khobar?
- You call or email with the machine name, the alarm text and a photo of the controller.
- An engineer connects remotely if the link is available, and starts on the same day.
- We isolate the failed module, wiring fault or logic path.
- If parts or hands are needed, an engineer is on site within one working day.
- We restore the machine, back up the program and write a short report.
- We suggest a retrofit only when the fault history justifies it.
Our emergency PLC support page lists the controllers we cover.
Can you review our I/O list before we tender?
Yes, and consultants use this often. Send the draft I/O list and functional description, and we return a marked-up list showing missing signals, spare capacity and controller sizing, with a priced scope alongside. Nothing is committed until you approve the scope. Plants that prefer to see data on a phone can add remote monitoring to the same quotation.
Al Khobar industrial automation questions
Who provides industrial automation in Al Khobar?
KSA Industrial Automation Company provides PLC, HMI and SCADA programming, retrofit, telemetry and fault support in Al Khobar from its office in Al Shati District, Dammam. Saudi Aramco, SABIC and the Royal Commission all approve our company. Your quotation arrives within one working day.
What affects the cost of an automation job in Al Khobar?
Cost follows the number of I/O points, the controller family, whether drawings exist, how much testing you want to witness and how many site days are needed. Fault-finding is priced by effort, and a retrofit by a scope we agree after reviewing your program.
How long does it take for you to reach an Al Khobar site?
Remote support starts the same day, and an engineer is on site within one working day anywhere in the Eastern Province. Because Dammam and Al Khobar are neighbouring cities, travel is rarely the limiting factor; access permits usually are.
Which controllers do you repair or replace?
We work on Siemens S7-300, S7-400, S7-1200 and S7-1500, Rockwell ControlLogix and CompactLogix, Schneider Modicon M340 and M580, and ABB AC500. We start every job with a backup of the existing program before touching anything.
Can you work with our consultant's drawings?
Yes. We take the consultant's I/O list, P&IDs and control narrative as the baseline, raise queries in writing, and issue software that follows the narrative clause by clause for their review.
What should I send for a quotation?
Send the I/O list, drawings or a plain description of the fault, with controller models and photos if you have them. Existing program backups also help. We return a proposal within one working day.
Need industrial automation in Al Khobar? Send us your I/O list, drawings or fault description and get a quotation within one working day.
Email: inquiry@ksaindustrialautomation.com | Request a quotation