KSA Industrial Automation Company provides Schneider Electric PLC programming in Saudi Arabia for Modicon M340, M580 and Machine Expert controllers, with Harmony and Magelis operator screens and Modbus networks. We are a certified Schneider Electric partner. Programs are written, simulated and commissioned by our own engineers, then documented so your maintenance team can run them.
What you receive: a written proposal with the Modicon family, software versions, deliverables and programme, issued within one working day of receiving your I/O list, P&IDs or existing project. Request a quotation
Schneider Electric PLC programming for Modicon M340 and M580
Schneider controllers are common in water and wastewater, utilities and packaged skids, where Schneider drives and power meters share one Modbus network with the PLC. Here is what we program and connect.
| Item | Platforms / range | Standard | Typical duration |
|---|---|---|---|
| Controller programming | Modicon M340 and M580 in EcoStruxure Control Expert; machine controllers in EcoStruxure Machine Expert | IEC 61131-3 | 2–6 weeks per system |
| HMI | Vijeo and EcoStruxure Operator Terminal Expert | ISA-101 principles | 1–4 weeks |
| Networks | Modbus TCP and RTU, EtherNet/IP and remote I/O drops | Protocol specification of each device | Included in the programme |
| Drives and meters | Altivar drives and PowerLogic meters read and commanded from the PLC | Manufacturer guidelines | Per device count |
| Telemetry links | Modbus, DNP3, OPC UA over 4G, fibre or radio | Project communication specification | 3–8 weeks |
| Software FAT | Logic tested against simulated I/O with a signed record | Your ITP or ours | Per project schedule |
Which software is used to program a Schneider PLC?
Two packages cover most work. EcoStruxure Control Expert programs the larger Modicon M340 and M580 controllers. EcoStruxure Machine Expert programs the compact machine controllers. Both support ladder, function block, structured text and sequential function chart. Schneider operator terminals use EcoStruxure Operator Terminal Expert or the older Vijeo tools, and each package has its own licence, which we confirm before work starts.
Because Modbus is native to the family, third-party meters and drives are easy to read. Our work in EcoStruxure Control Expert follows derived function blocks, so one tested block serves every pump, valve and motor on the project.
Is Schneider Electric an automation company?
Yes. Schneider Electric makes controllers, drives, motor control, instruments and power distribution, so one plant often has Schneider equipment on several layers. That helps an integrator, because the controller, the Altivar drives and the energy meters can all be reached from one Modicon program.
Our energy monitoring systems scope uses exactly this approach. For SCADA, we integrate Schneider devices into the platform your plant already runs, with the register map agreed in writing first. A Schneider HMI commissioning job on a skid usually runs alongside the controller test, so screens and logic are proved together.
How do we program and integrate a Modicon system?
- Enquiry. You send the I/O list, P&IDs or the existing Control Expert project.
- Site data. We confirm the Modicon family, firmware, network layout, and the drives and meters on it.
- Design. A functional design lists the derived function blocks and the interlock matrix.
- Programming. Each equipment type is built as a tested block and instantiated across the plant.
- Software test. The logic runs against simulated signals and a Modbus simulator with every fault forced.
- Site commissioning. We download to the controller, check each signal and drive, and tune loops under load.
- Documentation and support. You receive the archive, an offline backup, the Modbus register map and the test record.
The same discipline sits behind our general PLC programming services, and screens follow the practice on the HMI development page.
Where we deliver Schneider controller work
We have carried out controls work in Saudi Arabia since 1995 and hold approval from Saudi Aramco, SABIC and the Royal Commission for Jubail and Yanbu. We have worked on projects for Marafiq in Jubail.
Schneider jobs reach us in three forms. A new pump station or treatment unit that the consultant specified on Modicon. An older Quantum or Premium system ready for a planned move, covered under PLC retrofit and upgrade. A mixed site where Schneider meters and drives must feed a SCADA platform of another make. We take Schneider projects in every region of Saudi Arabia.
Schneider Electric partner questions
Who provides Schneider Electric PLC programming in Saudi Arabia?
KSA Industrial Automation Company provides Schneider Electric PLC programming in Saudi Arabia from its Dammam engineering office. We cover Modicon M340 and M580 in Control Expert, machine controllers in Machine Expert, operator screens and Modbus integration, and we attend sites across the Kingdom.
Who are the Schneider distributors in Saudi Arabia?
KSA Industrial Automation Company provides the engineering rather than the stock. Controllers, drives and meters are bought through Schneider Electric's own sales channels and electrical distributors. We draft the I/O schedule and a parts list for your buyers, then program, test and commission what is delivered.
How much does Schneider HMI commissioning cost?
The price depends on the number of screens, the tags behind them, the alarm and user-access requirements and the devices the HMI talks to. Commissioning time on site adds to it. Send the tag list or screen sketches and the proposal separates design, build and site testing.
How long does Schneider PLC programming take?
Most Modicon systems take two to six weeks of programming, and operator screens add one to four weeks. The I/O count, the number of Modbus devices and the speed of your approvals decide where a project falls within that range.
Can you connect Schneider drives and meters to another vendor's SCADA?
Yes. We map the registers of each drive and meter, bring them into the Modicon program or read them through a gateway, and present them to your SCADA over Modbus or OPC UA. You receive a signed register list and a communication test record.
What should I send to get a quotation?
Send your I/O list, P&IDs and the Schneider hardware list. If a program exists, add the Control Expert or Machine Expert version and a backup file. We then issue a priced proposal that separates programming, screens and site commissioning.
Looking for Schneider Electric PLC programming in Saudi Arabia? Send your I/O list and Schneider hardware list and receive a quotation within one working day. See all automation partners.
Email: inquiry@ksaindustrialautomation.com | Request a quotation