KSA Industrial Automation Company provides industrial automation in Dammam: PLC, HMI and SCADA programming, controller migration, telemetry and commissioning for plants, utilities and machine builders. Our office is in Al Shati District, Dammam, and the company was established in 1995. You receive a quotation within one working day, and a fault call gets remote help the same day.
What you receive: a written Dammam proposal covering platforms, scope, programme and price, returned one working day after we receive your I/O list, P&IDs or functional description. Request a quotation
Industrial automation in Dammam: what we deliver
Most Dammam enquiries fall into the four work packages below. Each is quoted from your own drawings, not from a price list.
| Work package | Platforms | Standard | Typical duration |
|---|---|---|---|
| PLC programming | Siemens S7-1200/1500 (TIA Portal), S7-300/400; Rockwell ControlLogix/CompactLogix; Schneider Modicon M340/M580; ABB AC500 | IEC 61131-3 | 2–6 weeks per system |
| HMI screens | WinCC, FactoryTalk View, EcoStruxure Operator Terminal Expert | ISA-101 where relevant | 1–4 weeks |
| SCADA and historian | WinCC, FactoryTalk, AVEVA, Ignition | ISA-18.2 alarm practice | 4–12 weeks |
| Commissioning, FAT and SAT | Loop folders and test procedures | ITP per project | Per project schedule |
Where the control panel is built by your panel supplier, we run the functional factory test there before the cabinet ships to your plant.
Which industrial areas in Dammam do we support?
We support plants in the Dammam 1st, 2nd and 3rd Industrial Cities, the port and logistics zones around King Abdulaziz Port, and standalone sites along the Dammam–Jubail road. Typical Dammam systems are fabrication shops, packaging and food lines, cold stores, water treatment skids, pump stations and the compressor sets that oil service yards run.
Most of this work is control-system rework rather than new plant: a controller that is out of support, a line that needs recipes, or a pump station nobody can see from the office.
Can a PLC fault in Dammam be fixed remotely?
Often yes. If your controller is reachable through a secure link, we read diagnostics, find the failed module or logic path, and advise on the same day. If it needs hands, an engineer reaches a site in the Eastern Province within one working day. Details are on our emergency PLC support page.
How does a Dammam automation project run?
- You send the I/O list, P&IDs or a functional description.
- We confirm platform, scope and duration, and issue the quotation.
- We write the PLC, HMI and SCADA software to IEC 61131-3.
- You witness the functional FAT, on our bench or at your plant.
- We commission on site, check every loop and record the results.
- You receive as-built software, backups and loop folders, with support after handover.
Why choose a Dammam-based automation team?
We are approved by Saudi Aramco, SABIC and the Royal Commission for Jubail and Yanbu, and our quality, environmental and safety systems hold ISO 9001, ISO 14001 and ISO 45001. In Dammam we have worked on projects for SABIC. That documentation discipline carries into every Dammam job, from change records to final dossiers. A team in the same city also means a short route from your gate to our desk for a workshop or a site walk.
Our address in Dammam
KSA Industrial Automation Company Al Shati District, Dammam, Eastern Province, Saudi Arabia Email: inquiry@ksaindustrialautomation.com
Dammam industrial automation questions
Who provides industrial automation in Dammam?
KSA Industrial Automation Company provides PLC, HMI and SCADA programming, migration, telemetry and commissioning from its office in Al Shati District, Dammam. Saudi Aramco, SABIC and the Royal Commission all approve our company. Send your I/O list for a quotation within one working day.
What affects the cost of an automation project in Dammam?
Cost follows the number of I/O points, the controller platform, the size of the HMI and SCADA screens, the number of interlocks and recipes, and how much on-site commissioning is needed. A clear I/O list lets us price against real counts rather than allowances.
How long does a PLC or SCADA project take in Dammam?
A PLC system typically takes 2–6 weeks, an HMI 1–4 weeks and a SCADA system 4–12 weeks. Drawing approvals, your shutdown window and the number of units decide where in that range your project falls.
Can you work inside our shutdown window?
Yes. We prepare and test the software beforehand, so the shutdown is used for installation, loop checks and start-up only. We agree an hour-by-hour cut-over plan with your maintenance team before the window opens.
Do you support the PLC brands we already run?
Yes. We work on Siemens, Rockwell, Schneider and ABB controllers, so a plant with a mixed fleet can have one team for all of it. We usually begin with a backup of each program and a list of unsupported modules.
What should I send for a quotation?
Start with the I/O list or P&IDs of the unit concerned. Existing program backups, network diagrams and photos of the cabinet help us price migration or fault-finding work accurately and return a proposal within one working day.
Need industrial automation in Dammam? Send us your I/O list, P&IDs or functional description and get a quotation within one working day.
Email: inquiry@ksaindustrialautomation.com | Request a quotation